Model Description Works With
ME-AGS-N (ME-AGS-PT1, ME-AGS-PT2)

Automatically start and stop your generator using multiple parameters.

ME Series Inverter Charger | MS Series Inverter Charger | MSH Series Inverter Chargers
More Info Download Owners Manual Download Spec Sheet
Model Description Works With
ME-AGS-S

The ME-AGS-S is the 'standalone' version of Magnum Energy's Automatic Generator Start (AGS) controllers.

ME Series Inverter Charger | MS Series Inverter Charger | MSH Series Inverter Chargers
More Info Download Owners Manual Download Spec Sheet
Model Description Works With
ME-BMK (ME-BMK-NS)

The ME-BMK/ME-BMK-NS is a single battery bank amp-hour meter that monitors and provides important information about the condition of the battery.

ME Series Inverter Charger | MS Series Inverter Charger | MSH Series Inverter Chargers
More Info Download Owners Manual Download Spec Sheet
Model Description Works With
ME-MW-W

The MagWeb is a powerful and cost effective tool for remotely monitoring Magnum Energy’s inverters and accessories.

MM-AE Series Inverter Charger | MS Series Inverter Charger | MS-PAE Series 120/240V Inverter Charger | MSH-RE Series Pure Sine Inverter Charger | RD Series Inverter Charger
More Info Download Owners Manual Download Spec Sheet
Model Description Works With
ME-MW-E

The MagWeb is a powerful and cost effective tool for remotely monitoring Magnum Energy’s inverters and accessories.

MM-AE Series Inverter Charger | MS Series Inverter Charger | MS-PAE Series 120/240V Inverter Charger | MSH-RE Series Pure Sine Inverter Charger | RD Series Inverter Charger
More Info Download Owners Manual Download Spec Sheet
Model Description Works With
ME-CB

This conduit box accommodates installations where the electrical code requires the AC and/or DC wiring to be enclosed and protected by conduit.

ME Series Inverter Charger | MS Series Inverter Charger | MSH Series Inverter Chargers
More Info Download Owners Manual
Model Description Works With
430012

Fuse: 300 amp, 125 volt, 3.187L

More Info
Model Description Works With
510031

Non-illuminated momentary switch, no cable

More Info
Model Description Works With
310103-10 Two red DC covers with cover screws. Works with NP Series.
More Info
Model Description Works With
BR-PV40-DIN

40 amps, 250 VDC, DIN Mount

More Info
Model Description Works With
FDLS-150-1

150A

More Info
Model Description Works With
ME-BTS-40

Battery temperature sensor: 40' long cable

Works with: LPC Series, MM Series, MMS Series, MS Series, NP Series

More Info
Model Description Works With
T300

Fuse: 300 amp, class T

More Info
Model Description Works With
ME-ISA

Remote ignition switch

More Info Download Owners Manual
Model Description Works With
310100 (310100-1, 310100-10, 310100-20)

Black DC terminal kit. Works with NP Series.

310100 includes: Terminal

More Info
Model Description Works With
BR-PV50-DIN

50 amps, 250 VDC, DIN Mount

More Info
Model Description Works With
611622-15

Temperature compensation: 15' cable assembly

Works with NP Series

More Info
Model Description Works With
430054

Fuse: 350 amp, 125 volt, 3.187L

More Info
Model Description Works With
612007-20

Remote LED momentary switch, 20' cable

More Info
Model Description Works With
310101 (310101-3, 310101-10, 310101-20)

DC terminal kit. Works with NP Series.

310101 includes: Terminal

More Info
Model Description Works With
611622-20

Temperature compensation: 20' cable assembly

Works with NP Series

More Info
Model Description Works With
430019

Fuse: 400 amp, 125 volt, 3.187L

More Info
Model Description Works With
612016-20

Remote LED snap switch, 20' cable

More Info
Model Description Works With
ME-DISPLAY

Grey ME Series case.

More Info
Model Description Works With
611622-25

Temperature compensation: 25' cable assembly

Works with NP Series

More Info
Model Description Works With
T400

Fuse: 400 amp, class T

More Info
Model Description Works With
430005

GFCI outlet replacement kit. Color: white

More Info
Model Description Works With
MS-DISPLAY

MS Series case in white.

More Info
Model Description Works With
ME-125F

Fuse block assembly: 125 amp, class ANL

More Info
Model Description Works With
430060

Fuse: 500 amp, 125 volt, 3.187L

More Info
Model Description Works With
TC-GRAY

Top cover in grey. Serial number required when ordering.

Works with ME Series, RD Series, and RD-E Series.
More Info
Model Description Works With
BR-AC30D

AC 30 amp, Dual pole QOU

More Info
Model Description Works With
ME-200F

Fuse block assembly: 200 amp, class ANL

More Info
Model Description Works With
430068

Fuse: 800 amp, 125 volt, 3.187L

More Info
Model Description Works With
TC-MM

Top cover in black. Works with: MM Series, MM-E Series

More Info
Model Description Works With
BR-AC60S

AC 60 amp, Single pole QOU

Works with: MMP Panel System, MPSL Panel System, and MPX Kits.

More Info
Model Description Works With
ME-300F

Fuse block assembly: 300 amp, class T

More Info
Model Description Works With
FDLS-50-1

Circuit breaker: 50 amp, resettable

More Info
Model Description Works With
TC-MMS

Top cover in black. Works with: MMS Series, MMS-E Series

More Info
Model Description Works With
BR-DC75-BM

DC 75 amp, back mount.

More Info
Model Description Works With
MP-CCB

The MP Charge Controller Bracket (MP-CCB) allows you to add a second charge controller to an MMP or MP Panel System.

PT-100 MPPT Charge Controller | MMP Series - Mini Magnum Panel | MPDH - Magnum Panel
More Info Download Owners Manual
Model Description Works With
ME-400F

Fuse block assembly: 400 amp, class T

More Info
Model Description Works With
FDLS-60-1

Circuit breaker: 60 amp, resettable

More Info
Model Description Works With
TC-MSH

Top cover in white. Serial number required when ordering. Works with: MSH-M Series, MSH-RE Series, MSH-RV Series

More Info
Model Description Works With
BR-DC100-BM

DC 100 amp, back mount

More Info
Model Description Works With
MPX-CB

The MPX-CB conduit box fits on the bottom of the larger Magnum Energy inverters (i.e., ME, MS, RD, etc.,), and provides kn

ME Series Inverter Charger | MS Series Inverter Charger | RD Series Inverter Charger | MS-PAE Series 120/240V Inverter Charger
More Info Download Owners Manual
Model Description Works With
430030

Fuse holder for AMG type fuses

Available accessory: 430031

More Info
Model Description Works With
FDLS-80-1

Circuit breaker: 80 amp, resettable

More Info
Model Description Works With
TC-WHT (TC-WHT-F)

Top cover in white. Serial number required when ordering.

More Info
Model Description Works With
BR-DC175

DC 175 amp, front mount 3/8 bolts

More Info
Model Description Works With
ME-RC-BZ

Mounting bezel for the ME-RC remote. Note: ME-ARC remotes come with bezel standard.

ME-RC | ME-ARC Remote
More Info Download Owners Manual
Model Description Works With
430020

Fuse: 50 amp, 125 volt, 3.187L

More Info
Model Description Works With
FDLS-100-1

Circuit breaker: 100 amp, resettable

More Info
Model Description Works With
A88-0010

Hardware kit includes AC door and DC covers in grey. Works with: ME Series, RD Series, RD-E Series

More Info
Model Description Works With
BR-DC250

DC 250 amps, front mount 3/8 bolts

More Info
Model Description Works With
ME-SSI

Cable to series stack two MS4024 inverter/chargers to provide 120/240 VAC.

4000W 24VDC Pure Sine Inverter Charger MS Series
More Info Download Owners Manual
Model Description Works With
430007

Fuse: 80 amp, 125 volt, 3.187L

More Info
Model Description Works With
430018

Fuse: 100 amp, 125 volt, 3.187L

More Info
Model Description Works With
FDLS-120-1

Circuit breaker: 120 amp, resettable

More Info
Model Description Works With
A88-0011

Hardware kit includes AC door and DC covers in white.

More Info
Model Description Works With
BR-DC100-DIN

100 amps, 125 VDC, DIN Mount

More Info
Model Description Works With
ME-TS60

This temperature sensor connects directly to the ME-AGS Series and includes a 60' cable.

ME-AGS Auto Gen Start
More Info
Model Description Works With
430052

Fuse: 150 amp, 125 volt, 3.187L

More Info
Model Description Works With
MM-ISA

The MM-ISA ignition switch adapter turns the inverter on and off with a 12-volt source

More Info Download Owners Manual
Model Description Works With
A88-0014

Hardware kit includes AC door and DC covers in black. Works with: MM Series, MM-E Series, MMS Series, MMS-E Series.

More Info
Model Description Works With
BR-PV10-DIN

10amps, 250 VDC, DIN Mount

More Info
Model Description Works With
ME-PT1, ME-PT2

The ME-PT1 (pigtail one-wire) and ME-PT2 (pigtail two-wire) adapters connect to Magnum’s Auto Generator Start (ME-AGS) con

ME-AGS Auto Gen Start
More Info
Model Description Works With
430010

Fuse: 200 amp, 125 volt, 3.187L

More Info
Model Description Works With
ME-ISW

The ME-ISW ignition switch lockout includes a pigtail adapter for 12-volt ignition switch lockout feature.

More Info Download Owners Manual
Model Description Works With
310102

Black DC cover. Works with NP Series.

More Info
Model Description Works With
BR-PV15-DIN

15 amps, 250 VDC, DIN Mount

More Info
Model Description Works With
611348

14ft. cable with fuse (requires .83" x 1.45" cutout)

More Info
Model Description Works With
ME-BTS-8

Battery temperature sensor: 8' long cable

Works with: LPC Series, MM Series, MMS Series, MS Series, NP Series

More Info
Model Description Works With
430011

Fuse: 250 amp, 125 volt, 3.187L

More Info
Model Description Works With
ME-RSA-M

Pigtail adapter for momentary remote switch

More Info Download Owners Manual
Model Description Works With
310102-10

Two black DC covers with cover screws. Works with NP Series.

More Info
Model Description Works With
BR-PV20-DIN

20 amps, 250 VDC, DIN Mount

More Info
Model Description Works With
430067

Fuse: 600 amp, 125 volt, 3.187L

More Info
Model Description Works With
ME-BTS-15

Battery temperature sensor: 15' long cable

Works with: LPC Series, MM Series, MMS Series, MS Series, NP Series

More Info
Model Description Works With
430031

Fuse: 250 amp, AMG

More Info
Model Description Works With
ME-RSA

Pigtail adapter for SPST remote switch

More Info Download Owners Manual
Model Description Works With
310103

Red DC cover. Works with NP Series.

More Info
Model Description Works With
BR-PV30-DIN

30 amps, 250 VDC, DIN Mount

More Info
Model Description Works With
431021

Fuse block assembly with cover and nuts

More Info
Model Description Works With
ME-BTS-25

Battery temperature sensor: 25' long cable

Works with: LPC Series, MM Series, MMS Series, MS Series, NP Series

More Info