Remote

This episode of the Magnum video series guides you through the screens of the ME-ARC revision 4.0 in order to successfully start an Equalization charge. Equalization is a higher voltage charge that helps de-sulfate Lead Acid batteries. Performing an Equalization charge on batteries other than liquid lead acid or certain AGM types could permanently damage them. Check with your battery manufacturer to see if Equalizing is right for your battery bank and consult your ME-ARC manual for more information and precautions.

Get ready to take first steps with your Magnum Energy advanced feature remote control, the ME-ARC. This episode of the Magnum video series is designed to help guide you through the screens of the ME-ARC revision 4.0 in order to setup and optimize your inverter/charger. Other revisions may show slightly different screens, but this video should get you through the basics of programming. Please note that this video is not meant to go over every possible scenario, but rather give you an idea of how to program your system for your particular setup.

Keep your living space cool and your batteries charged without supervision and without worry. The ME-AGS monitors inside room temperature and low-battery conditions to start or stop your generator at the perfect moment, all of which can be controlled by connecting to the Magnum ME-RC remote control. This episode in the Magnum video series is designed to help guide you through the screens of the ME-RC revision 2.8 in order to setup your Automatic Generator Start module. Other revisions may show slightly different screens, but this video should get you through the basics of programming.

Keep your living space cool and your batteries charged without supervision and without worry. The ME-AGS monitors inside room temperature and low-battery conditions to start or stop your generator at the perfect moment, keeping your living space cool and comfortable even while you are away. Connecting the Magnum ME-ARC advanced remote unlocks even more features, including start and stop parameters based on battery voltage, time of day, AC load amps, exercise time, and state of charge (SOC).