MMP Series - Mini Magnum Panel

The MMP – Mini Magnum Panel is an inclusive, easy-to-install panel designed to work with one Magnum MS-AE, MS-PAE, MS, RD or other non-Magnum inverter / charger.

***Inverter sold seperately***

Owner's Manual 64-0029-Rev-D-Mini-Magnum-Panel_Web.pdf

Features Includes
  • Small Footprint
    only 12.5″ wide x 18″ tall x 8″ deep
  • Easy Access
    front-mounted breakers and remote (optional)
  • Choices
    can be wired for 120 VAC or 120/240 VAC output
  • Inclusive
    works with non-Magnum inverter / chargers (may require the optional knockout plate for the top of the MMP: an MMP-KP)
  • Regulatory Markings
    ETL listed to UL1741 and CSA C22.2 107-01
  • DC Load Breakers
    fits either din rail or back-mount DC load breakers.
  • One DC breaker – 175A or 250A
  • One AC bypass breaker – 30A dual pole or 60A single pole
  • One AC input breaker – 30A dual pole or 60A single pole
  • 500A/50mv DC shunt
  • DC buss bars for battery positive and negative
  • Din rail or back mount for optional DC mini breakers – will hold up to eight breakers
  • Inverter hood

MPSL - Magnum Panel

The MPSL – Magnum Panel, Single Enclosure, Low Capacity – is designed to accommodate a maximum of two inverters.

***Inverters sold separately***

Owner's Manual 64-0028.pdf

Features Includes
  • Expandable:
    start with the enclosure and just one inverter and in the future expand to two inverters with ease, using the MPX.
  • Easy installation:
    all connections are frontmounted, including AC and DC breakers and the MPX.
  • DC load breakers:
    fits either din rail or back-mount DC load breakers.
  • Convenient knockouts:
    knockouts on the side of the enclosure are compatible with most charge controllers.
  • One DC breaker – 175A or 250A
  • One 60A AC bypass breaker
  • 500A/50mv DC shunt
  • Inverter AC input protection
  • Inverter hood

MPSH - Magnum Panel

The MPSH – Magnum Panel, Single Enclosure, High Capacity – is designed to accommodate a maximum of three inverters.

***Inverters sold separately***

Owner's Manual 64-0028.pdf

Features Includes
  • More power capacity:
    the 125A bypass breaker and the 1000A DC shunt safely handle the power from larger systems.
  • Expandable:
    start with the enclosure and just one inverter and in the future expand to up to three inverters with ease, using the MPX.
  • Easy installation:
    all connections are frontmounted, including AC and DC breakers and the MPX.
  • Convenient knockouts:
    knockouts on the side of the enclosure are compatible with charge controllers.
  • One DC breaker – 175A or 250A
  • One 125A AC bypass breaker
  • 1000A/100mv DC shunt
  • Inverter AC input protection
  • Inverter hood

MPDH - Magnum Panel

The MPDH – Magnum Panel, Dual Enclosure, High Capacity – is designed to accommodate a maximum of four inverters with two enclosures – one for AC connections and one for DC connections.

***Inverters sold separately***

Owner's Manual 64-0028.pdf

Features Includes
  • More power capacity:
    the 125A bypass breaker and the 1000A DC shunt safely handle the power from larger systems.
  • Expandable:
    start with the enclosures and just two inverters and in the future expand to up to four inverters, using the MPX.
  • Easy installation:
    all connections are frontmounted, including AC and DC breakers and the MPX.
  • Labor saving:
    panel is pre- wired for fast installation, saving labor costs.
  • DC load breakers:
    fits either din rail or back-mount DC load breakers.
  • Separate AC and DC enclosures:
    for installers who prefer separate enclosures, the MPDH provides an easy solution.
  • Two DC breakers – 175A or 250A
  • One 125A AC bypass breaker
  • 1000A/100mv DC shunt
  • Inverter AC input protection
  • Two inverter hoods

MP-PE Series - Magnum Panel (Export 230VAC 50Hz)

The MP-PE (Magnum Panel) enclosures have been specifically designed to combine all of the major components required for a high power renewable energy system — inverter/battery disconnect, AC overcurrent protection, grounding connections, and a full system inverter bypass switch as a convenient way to isolate the inverters for battery maintenance — into easy-to-install pre-wired enclosures. Designed for multiple inverter applications, the MP-PE Series enclosures feature convenient front panel operation, and used with the optional Router (ME-RTR),  the MP-PE will allow you to easily set up, monitor, and operate up to four MS-PE inverter/chargers together (must be identical models to parallel stack).

In addition to saving time and money by providing a simple and convenient inverter installation, the MP-PE enclosures ensure safety and reliability by providing a CE certified and code compliant system.

***Inverters sold separately***

Owner's Manual 64-0028.pdf

Features Includes
  • Expandable
    Start with the enclosure and just one inverter and in the future expand to multiple inverters, depending on MP-PE model, with ease, using the MPX-PE.
  • Easy Installation
    All connections are front-mounted, including AC and DC breakers and the MPX-PE.
  • Labor Saving
    Panel is pre-wired for fast installation, saving labor costs.
  • DC Load Breakers
    Fits either din rail or back-mount DC load breakers.
  • Convenient Knockouts
    Knockouts on the side of the enclosure are compatible with most charge controllers.
  • MPSL-PE: One 175 or 250A DC breaker, depending on model
  • MPSL-PE: One 60A AC bypass breakder
  • MPSL-PE: 500A/50mv DC shunt
  • MPSH-PE: One 175 or 250A DC breaker, depending on model
  • MPSH-PE: One 125A AC bypass breakder
  • MPSH-PE: 1000A/100mv DC shunt
  • MPDH-PE: Two 175 or 250A DC breakers, depending on model
  • MPDH-PE: One 125A AC bypass breakder
  • MPDH-PE: 1000A/100mv DC shunt
  • Inverter AC input protection
  • Inverter hood/s